|
Yang, Q, Zhang, N., and Hong, Y., “Statistical
Reliability Analysis of Repairable Systems with Dependent Component
Failures under Partially Perfect Repair Assumption,”
IEEE Transactions on Reliability, in press. |
 |
Yang, Q., Hong, Y., Chen, Y., and Shi, J., “Failure
Profile Analysis of Complex Repairable Systems with Multiple
Failure Modes,” IEEE Transactions on Reliability,
vol. 61, pp 180-192, 2012. |
|
|
Yang, Q., and Jin, J., “Estimation of
Individual Source Signals from Mixed Sensor Measurements,”
IIE Transactions on Quality and Reliability Engineering,
vol. 44, pp 780-792, 2012. |
|
|
Yang, Q., and Chen, Y., “Evaluation of
Linear Sensor System Reliability Using Monte Carlo Methods,”
IEEE Transactions on Reliability,Vol 60, pp 305-314,
2011. |
|
|
Yang, Q., and Chen, Y., “Reliability of
Coordinate Sensor Systems under the Risk of increasing Measurement
Variance,” IEEE Transactions on Automation Science
and Engineering, vol.7, pp 291-302, 2010. |
|
|
Yang, Q. and Jin, J., and Chang, T.S. “Automatic
feature extraction and classification of surface defects for
continuous casting processes,” Transactions of
NAMRI/SME, vol.38, pp 563-570, 2010. |
|
|
Yang, Q., and Chen, Y., “Sensor System
Reliability Modeling and Analysis for Fault Diagnosis in Multistage
Manufacturing Processes,” IIE Transactions on
Quality and Reliability Engineering, vol.41, pp 819-830,
2009.(IIE Trans. Best Paper Award, 2011) |
|
|
Yang, Q., Li, Q., Jin, J., and Chang, T.S., “On-line
Classification of Surface Defects in Hot Rolling Processes," Transactions
of NAMRI/SME, vol.37, pp 371-378, 2009. |
|
|
Chen, Y., and Yang, Q., “Reliability of
Two-Stage Weighted-k-out-of-n Systems with Components in Common,”
IEEE Transactions on Reliability, vol.54, pp 431-440,
2005. |
|
|
Yang, Q., and Wang, Z., “Moving Point
Target Detection and Tracking under the Condition of Complex
Background,” Pattern Recognition and Artificial
Intelligence, vol.40, pp 256-260, 2004.(in Chinese) |
